Heavy Duty High Speed Vertical Machining Centers are designed with high rigidity and high precision for heavy workpieces. The XYZ box ways are hardened and precision grounded for maximum repeat ability. Our box way series can accommodate for heavier weight and milling capacity.
| Quantity: | |
|---|---|
1.Product Introduction of Vertical Turning and Milling Lathes
Heavy Duty High Speed Vertical Machining Centers are designed with high rigidity and high precision for heavy workpieces. The X,Z, C box ways are hardened and precision grounded for maximum repeat ability. Our box way series can accommodate for heavier weight and milling capacity. The heavy duty box way VMC series combines proven machine design with advance technology in control and manufacturing. Reliability and performance make this series a favorite among demanding job shops and in-house productions alike. Vertical machining centers with linear guide ways are also available.
The hydraulic device of the static pressure guideway oil of the worktable and the lubricating oil of the transmission parts is equipped with an oil temperature control device to ensure a small oil temperature rise and thermal deformation of the worktable.
The worktable is equipped with an encoder to realize closed-loop control. Realize the feed rate per revolution, thread and constant speed cutting and table indexing.
The worktable adopts a fixed-spindle-type short-spindle structure. A set of high-precision (P5) double-row short cylindrical roller bearings is installed on the spindle. The inner hole has a 1:12 taper hole. The radial clearance is adjusted to ensure The radial of the worktable has high precision and long service life.
Adavantage:
Our company adopts the international advanced resin sand casting process. The castings are made of HT300 and HT250 and then tempered twice. The castings are tempered once before processing. The castings are subjected to secondary tempering after rough machining. The tempering is tempered to the greatest extent in the tempering kiln. Reduce the internal stress of the casting, and perform vibration aging before finishing to prevent the casting from deforming, thereby improving the accuracy of the machine tool.
2.Products Specification of Vertical Turning and Milling Lathes
Parameter can be customized
The vertical lathe has C axis for milling, drilling, boring, tapping
Item | UNIT | CXK5235 | CXK5240 | CXK5250 | CXK5263 |
Wortable diameter | mm | 3150 | 3600 | 4500 | 5000 |
Max. Turning diameter | mm | 3500 | 4000 | 5000 | 6300 |
Turning height | mm | 2500 | 2500 | 3150 | 3150 |
Max. Loading weight | t | 32 | 32 | 50 | 50 |
Main motor power | kw | 29.6x2 | 29.6x2 | 55x2 | 55x2 |
Turning worktable rotation speed | rpm | 53 | 50 | 50 | 40 |
Turning worktable rotation speed(C axis) | rpm | 0.4 | 0.3 | 0.3 | 0.2 |
Max. Worktalbe torque | Nm | 63 | 63 | 80 | 80 |
Ram size | mm | 380x380 | 380x380 | 380x380 | 380x380 |
Ram travel（Z axis） | mm | 1250 | 1250 | 1600 | 1600 |
Tool post rapid travel（x、z axis） | mm/min | 6000 | 6000 | 6000 | 6000 |
Tool post feeding speed（x、z axis） | Mm/min | 0.1-2000 | 0.1-2000 | 0.1-2000 | 0.1-2000 |
Max turning force | kn | 50 | 50 | 50 | 50 |
Milling axis rotation speed | rpm | 5-2000 | 5-2000 | 5-2000 | 5-2000 |
Milling axis torque | Nm | 1600 | 1000 | 1000 | 1000 |
Milling axis power | kw | 28 | 28 | 28 | 28 |
Mill axis taper | iso | BT50 | BT50 | BT50 | BT50 |
Cross beam travel | mm | 2100 | 2100 | 2700 | 2700 |
Cross beam moving speed | Mm/min | 350 | 350 | 350 | 350 |
Tool quantity in amagazine | 20 | 20 | 20 | 20 | |
Attachment | position | 6 | 6 | 6 | 6 |
x、z、y axis positioning precision | mm | 0.01 | 0.01 | 0.01 | 0.01 |
x、z、yaxis repeat positioning precision | mm | 0.005 | 0.005 | 0.005 | 0.005 |
C axis positioning precision | sec | ±3″ | ±3″ | ±3″ | ±3″ |
C axis repeat positioning precision | sec | 3″ | 3″ | 3″ | 3″ |
Parameter | Unit | CXK5245 | CXK5280 | CXK52100 | CXK52125 |
Max turning diameter | mm | 4500 | 8000 | 10000 | 12500 |
Max workpiece height | mm | 1600 | 4500 | 5500 | 5500 |
Max load capacity | Tons | 16/32 | 80 | 250 | 250 |
Worktable diameter | mm | 3800 | 7100 | 7100 | 7500 |
Worktable speed steps | stepless | stepless | stepless | stepless | |
Worktable speed range | rpm | Turning：0.5-50 Milling：0.001-1 | Turning：0.2~20 Milling：0.001~1 | Turning：0.16-16 Milling：0.002-0.2 | Turning：0.16-16 Milling：0.002-0.2 |
Max torque | Kn.m | 63 | 150 | 640 | 640 |
C axis circle feed range | 0.001-1 | 0.001-1 | 0.001-1 | 0.001-1 | |
C axis index | Random | Random | Random | Random | |
Tool post horizontal travel | mm | -20~2975 | -50~4250 | Left：5230 Right：5650 | Left：6430 Right: 6900 |
Milling tool post vertical travel | mm | 1000 | 2250 | 2760 | 2760 |
Turning tool post vertical travel | mm | - | 2250 | 2760 | 2760 |
Tool post feed range | Mm/min | 0.1-1000 | 0.10-100 | Left： 0.1-1000 Right： 0.1-500 | Left： 0.1-1000 Right： 0.1-500 |
Ram section size | mm | 280x280 | 320x320 | 400x400 | 400x400 |
Tool bar section size | mm | 50x50 | 50x50 | 80x80 | 100x100 |
Tool post rapid moving speed | Mm/min | 4000 | 2000 | 2000 | 2000 |
Milling spindle motor power | kw | 17 | 17 | 17 | 7.5 |
Milling spindle speed range | Rpm | 10-1000 | 10-1000 | 10-1000 | 1-1000 |
Milling spindle taper hole | BT50 | BT50 | BT50 | BT50 | |
Beam vertical travel | mm | 1300 | 3500 | 4000 | 4000 |
Beam lifting speed | Mm/min | 350 | 310 | 300 | 300 |
Beam lifting motor power | kw | 11 | 30 | 75 | 75 |
Main motor power | Kw | 67 | 110 | 132 | 132 |
Machine weight | Ton | 70 | 230 | 570 | 600 |
3. Details
4. Adavantage:
1. Our company adopts the international advanced resin sand casting process. The castings are made of HT300 and HT250 and then tempered twice. The castings are tempered once before processing. The castings are subjected to secondary tempering after rough machining. The tempering is tempered to the greatest extent in the tempering kiln. Reduce the internal stress of the casting, and perform vibration aging before finishing to prevent the casting from deforming, thereby improving the accuracy of the machine tool.
2. FANUC and Siemens system, it make process workpiece easily and precisely.
3. Much strenghen structure which will guarantee working steadily for a long run.
4. Whole production supervision will guarantee no defects of production.
5. Serious installation service, training, and free consultant in whole work life.
5.Glance of workshop of Vertical Turning and Milling Lathes
6. Work flow
Work piece
The CNC VTL is good at machining tougher work and better.
The machines has been working for wind power parts for many years.
More bigger parts, more steady machining, Customers of Double Turret Vertical Lathe
Customers
Various size can be provided to meet various size of workpiece
Ценность
Целостность: Это происходит из чувства чести и основано на уважении к себе и другим. Заставляйте людей действовать честно.
Единство: Это одна из выдающихся человеческих ценностей, ориентированная на взаимное сотрудничество между людьми, особенно при столкновении с трудностями.
Ответственность: Имейте в виду, что то, что мы делаем или прекращаем делать, может иметь некоторые последствия для других или для нас самих.
Пунктуальность: Придать нашей личности характер, порядок и эффективность, помочь нам лучше выполнять нашу работу и быть заслуживающими доверия.
Общение: Это помогает нам эффективно обмениваться мыслями, мыслями и чувствами с окружающими нас людьми в сердечной атмосфере.
Командная работа: Мы складываемся, мы все нуждаемся друг в друге, мы главные герои одного проекта и одной и той же истории, мы преследуем общую цель.
Целостность: Независимо от того, относитесь ли вы к другим или к себе, всегда действуйте в соответствии с ценностями справедливости, честности, правды и справедливости.
Почему выбирают нас
1.Лучший компонент
Практически все комплектующие станков поступают из Германии, Японии, Америки и известного китайского производителя.
2.Клиенты
У нас есть референтные клиенты в более чем 40 странах, таких как Siemens, ITT, Hanwha, CRRC, Bombardier ....
3.Устойчивая технология
То, чем мы владеем, - это устойчивая технология производства станков, которые гарантируют устойчивость и более длительный срок службы.
4. Строгое определение качества
Качество и точность наших станков строго гарантируется КИМ, индикатором циферблата и т.д. и нашими опытными работниками.
5. Наши сотрудники
Наши сотрудники профессиональны, добры и трудолюбивы к нашим клиентам.
1.Product Introduction of Vertical Turning and Milling Lathes
Heavy Duty High Speed Vertical Machining Centers are designed with high rigidity and high precision for heavy workpieces. The X,Z, C box ways are hardened and precision grounded for maximum repeat ability. Our box way series can accommodate for heavier weight and milling capacity. The heavy duty box way VMC series combines proven machine design with advance technology in control and manufacturing. Reliability and performance make this series a favorite among demanding job shops and in-house productions alike. Vertical machining centers with linear guide ways are also available.
The hydraulic device of the static pressure guideway oil of the worktable and the lubricating oil of the transmission parts is equipped with an oil temperature control device to ensure a small oil temperature rise and thermal deformation of the worktable.
The worktable is equipped with an encoder to realize closed-loop control. Realize the feed rate per revolution, thread and constant speed cutting and table indexing.
The worktable adopts a fixed-spindle-type short-spindle structure. A set of high-precision (P5) double-row short cylindrical roller bearings is installed on the spindle. The inner hole has a 1:12 taper hole. The radial clearance is adjusted to ensure The radial of the worktable has high precision and long service life.
Adavantage:
Our company adopts the international advanced resin sand casting process. The castings are made of HT300 and HT250 and then tempered twice. The castings are tempered once before processing. The castings are subjected to secondary tempering after rough machining. The tempering is tempered to the greatest extent in the tempering kiln. Reduce the internal stress of the casting, and perform vibration aging before finishing to prevent the casting from deforming, thereby improving the accuracy of the machine tool.
2.Products Specification of Vertical Turning and Milling Lathes
Parameter can be customized
The vertical lathe has C axis for milling, drilling, boring, tapping
Item | UNIT | CXK5235 | CXK5240 | CXK5250 | CXK5263 |
Wortable diameter | mm | 3150 | 3600 | 4500 | 5000 |
Max. Turning diameter | mm | 3500 | 4000 | 5000 | 6300 |
Turning height | mm | 2500 | 2500 | 3150 | 3150 |
Max. Loading weight | t | 32 | 32 | 50 | 50 |
Main motor power | kw | 29.6x2 | 29.6x2 | 55x2 | 55x2 |
Turning worktable rotation speed | rpm | 53 | 50 | 50 | 40 |
Turning worktable rotation speed(C axis) | rpm | 0.4 | 0.3 | 0.3 | 0.2 |
Max. Worktalbe torque | Nm | 63 | 63 | 80 | 80 |
Ram size | mm | 380x380 | 380x380 | 380x380 | 380x380 |
Ram travel（Z axis） | mm | 1250 | 1250 | 1600 | 1600 |
Tool post rapid travel（x、z axis） | mm/min | 6000 | 6000 | 6000 | 6000 |
Tool post feeding speed（x、z axis） | Mm/min | 0.1-2000 | 0.1-2000 | 0.1-2000 | 0.1-2000 |
Max turning force | kn | 50 | 50 | 50 | 50 |
Milling axis rotation speed | rpm | 5-2000 | 5-2000 | 5-2000 | 5-2000 |
Milling axis torque | Nm | 1600 | 1000 | 1000 | 1000 |
Milling axis power | kw | 28 | 28 | 28 | 28 |
Mill axis taper | iso | BT50 | BT50 | BT50 | BT50 |
Cross beam travel | mm | 2100 | 2100 | 2700 | 2700 |
Cross beam moving speed | Mm/min | 350 | 350 | 350 | 350 |
Tool quantity in amagazine | 20 | 20 | 20 | 20 | |
Attachment | position | 6 | 6 | 6 | 6 |
x、z、y axis positioning precision | mm | 0.01 | 0.01 | 0.01 | 0.01 |
x、z、yaxis repeat positioning precision | mm | 0.005 | 0.005 | 0.005 | 0.005 |
C axis positioning precision | sec | ±3″ | ±3″ | ±3″ | ±3″ |
C axis repeat positioning precision | sec | 3″ | 3″ | 3″ | 3″ |
Parameter | Unit | CXK5245 | CXK5280 | CXK52100 | CXK52125 |
Max turning diameter | mm | 4500 | 8000 | 10000 | 12500 |
Max workpiece height | mm | 1600 | 4500 | 5500 | 5500 |
Max load capacity | Tons | 16/32 | 80 | 250 | 250 |
Worktable diameter | mm | 3800 | 7100 | 7100 | 7500 |
Worktable speed steps | stepless | stepless | stepless | stepless | |
Worktable speed range | rpm | Turning：0.5-50 Milling：0.001-1 | Turning：0.2~20 Milling：0.001~1 | Turning：0.16-16 Milling：0.002-0.2 | Turning：0.16-16 Milling：0.002-0.2 |
Max torque | Kn.m | 63 | 150 | 640 | 640 |
C axis circle feed range | 0.001-1 | 0.001-1 | 0.001-1 | 0.001-1 | |
C axis index | Random | Random | Random | Random | |
Tool post horizontal travel | mm | -20~2975 | -50~4250 | Left：5230 Right：5650 | Left：6430 Right: 6900 |
Milling tool post vertical travel | mm | 1000 | 2250 | 2760 | 2760 |
Turning tool post vertical travel | mm | - | 2250 | 2760 | 2760 |
Tool post feed range | Mm/min | 0.1-1000 | 0.10-100 | Left： 0.1-1000 Right： 0.1-500 | Left： 0.1-1000 Right： 0.1-500 |
Ram section size | mm | 280x280 | 320x320 | 400x400 | 400x400 |
Tool bar section size | mm | 50x50 | 50x50 | 80x80 | 100x100 |
Tool post rapid moving speed | Mm/min | 4000 | 2000 | 2000 | 2000 |
Milling spindle motor power | kw | 17 | 17 | 17 | 7.5 |
Milling spindle speed range | Rpm | 10-1000 | 10-1000 | 10-1000 | 1-1000 |
Milling spindle taper hole | BT50 | BT50 | BT50 | BT50 | |
Beam vertical travel | mm | 1300 | 3500 | 4000 | 4000 |
Beam lifting speed | Mm/min | 350 | 310 | 300 | 300 |
Beam lifting motor power | kw | 11 | 30 | 75 | 75 |
Main motor power | Kw | 67 | 110 | 132 | 132 |
Machine weight | Ton | 70 | 230 | 570 | 600 |
3. Details
4. Adavantage:
1. Our company adopts the international advanced resin sand casting process. The castings are made of HT300 and HT250 and then tempered twice. The castings are tempered once before processing. The castings are subjected to secondary tempering after rough machining. The tempering is tempered to the greatest extent in the tempering kiln. Reduce the internal stress of the casting, and perform vibration aging before finishing to prevent the casting from deforming, thereby improving the accuracy of the machine tool.
2. FANUC and Siemens system, it make process workpiece easily and precisely.
3. Much strenghen structure which will guarantee working steadily for a long run.
4. Whole production supervision will guarantee no defects of production.
5. Serious installation service, training, and free consultant in whole work life.
5.Glance of workshop of Vertical Turning and Milling Lathes
6. Work flow
Work piece
The CNC VTL is good at machining tougher work and better.
The machines has been working for wind power parts for many years.
More bigger parts, more steady machining, Customers of Double Turret Vertical Lathe
Customers
Various size can be provided to meet various size of workpiece
Ценность
Целостность: Это происходит из чувства чести и основано на уважении к себе и другим. Заставляйте людей действовать честно.
Единство: Это одна из выдающихся человеческих ценностей, ориентированная на взаимное сотрудничество между людьми, особенно при столкновении с трудностями.
Ответственность: Имейте в виду, что то, что мы делаем или прекращаем делать, может иметь некоторые последствия для других или для нас самих.
Пунктуальность: Придать нашей личности характер, порядок и эффективность, помочь нам лучше выполнять нашу работу и быть заслуживающими доверия.
Общение: Это помогает нам эффективно обмениваться мыслями, мыслями и чувствами с окружающими нас людьми в сердечной атмосфере.
Командная работа: Мы складываемся, мы все нуждаемся друг в друге, мы главные герои одного проекта и одной и той же истории, мы преследуем общую цель.
Целостность: Независимо от того, относитесь ли вы к другим или к себе, всегда действуйте в соответствии с ценностями справедливости, честности, правды и справедливости.
Почему выбирают нас
1.Лучший компонент
Практически все комплектующие станков поступают из Германии, Японии, Америки и известного китайского производителя.
2.Клиенты
У нас есть референтные клиенты в более чем 40 странах, таких как Siemens, ITT, Hanwha, CRRC, Bombardier ....
3.Устойчивая технология
То, чем мы владеем, - это устойчивая технология производства станков, которые гарантируют устойчивость и более длительный срок службы.
4. Строгое определение качества
Качество и точность наших станков строго гарантируется КИМ, индикатором циферблата и т.д. и нашими опытными работниками.
5. Наши сотрудники
Наши сотрудники профессиональны, добры и трудолюбивы к нашим клиентам.
