It is a manual drive shaft lathe, This lathe is specially design for vehicle shaft, max. shaft diameter to turning can reach to 245mm, chuck bore diameter reach to 260mm.
| Quantity: | |
|---|---|
Description of Drive Shaft Lathes
It is a manual drive shaft lathe, This lathe is specially design for vehicle shaft, max. shaft diameter to turning can reach to 245mm, chuck bore diameter reach to 260mm.
Independent spindle structure, motor connect with spindle with 3 belts, spindle can run stepless, the voltage can be 440V, 220V and 380V.
It is easy to operate, X, Z feed is done by manual.
It is suitable for small workshop.
Parameter of Drive Shaft Lathes
Item | Unit | Q1325G | Q1313G |
Swing over bed | mm | 630 | 500/400 |
Swing over carriage | mm | 350 | 330/230 |
Guideway width | mm | 550 | 360 |
Spindle bore | mm | 250 | 130 |
Max. OD of workpiece | mm | 245 | 125 |
Max. Turning length | mm | 2000+ | 1500+ |
Max. Working speed | mm | 15-450 | 15-450 |
Toolpost position | 4 position | 4 position | |
Guideway hardness | HRC52 | HRC52 | |
Main spindle power | kW | 7.5kW | 5.5kW |
Chuck O.D. | mm | 500 | 320 |
X/Z feeding | Manual feeding | Manual feeding | |
X travel | mm | 350 | 320/180 |
Z Travel | mm | 1000+ | 1000+ |
Details of Drive Shaft Lathes
Description of Drive Shaft Lathes
It is a manual drive shaft lathe, This lathe is specially design for vehicle shaft, max. shaft diameter to turning can reach to 245mm, chuck bore diameter reach to 260mm.
Independent spindle structure, motor connect with spindle with 3 belts, spindle can run stepless, the voltage can be 440V, 220V and 380V.
It is easy to operate, X, Z feed is done by manual.
It is suitable for small workshop.
Parameter of Drive Shaft Lathes
Item | Unit | Q1325G | Q1313G |
Swing over bed | mm | 630 | 500/400 |
Swing over carriage | mm | 350 | 330/230 |
Guideway width | mm | 550 | 360 |
Spindle bore | mm | 250 | 130 |
Max. OD of workpiece | mm | 245 | 125 |
Max. Turning length | mm | 2000+ | 1500+ |
Max. Working speed | mm | 15-450 | 15-450 |
Toolpost position | 4 position | 4 position | |
Guideway hardness | HRC52 | HRC52 | |
Main spindle power | kW | 7.5kW | 5.5kW |
Chuck O.D. | mm | 500 | 320 |
X/Z feeding | Manual feeding | Manual feeding | |
X travel | mm | 350 | 320/180 |
Z Travel | mm | 1000+ | 1000+ |
Details of Drive Shaft Lathes
