Introduction: Drive Shaft Balancer is mainly used in the production and repair of all kinds drive shaft factories. It can balance one piece / two pieces/ three pieces and four pieces drive shaft. Manual welders and safety cover can be attached. Parmameters
| Quantity: | |
|---|---|
Introduction of Drive Shaft Balancing Machine
Drive Shaft Balancing Machine is mainly used in the production and repair of all kinds drive shaft factories.
It can balance one piece / two pieces/ three pieces and four pieces drive shaft.
Manual welders and safety cover can be attached.
Parmameters of Drive Shaft Balancing Machine
Technical data | SFHC-100 | SFHC-350 | SFHC-1100 | SFHC-3500 |
Max Mass of Workpiece (kg) | 100 | 350 | 1100 | 3500 |
Effective length of workpiece(mm) | 2000 | 2000 | 3000 | 3000 |
Max Diameter of Workpiece(mm) | Φ130 | Φ130 | Φ400 | Φ400 |
Shaft tube diameter of workpiece(mm) | Ø120 | Ø120 | Ø300 | Ø300 |
Balancing speed(mm) | 16001) | 16001) | 410-7501) | 410-7501) |
Motor Power(KW) | 1.52) | 2.22) | 32) | 5.52) |
Universal joint torque(N.M) | 60 | 60 | 300 | 300 |
Min Achievable Residual Unbalance Amount(e mar ) | ≤2.5g | ≤2.5g | ≤2.5g | ≤2.5g |
Once reduced rate (%) | ≥90 | ≥90 | ≥90 | ≥90 |
Strict Product Quality Control 
Company Certificates:
Customers
Workshop debugging
Packaging
Introduction of Drive Shaft Balancing Machine
Drive Shaft Balancing Machine is mainly used in the production and repair of all kinds drive shaft factories.
It can balance one piece / two pieces/ three pieces and four pieces drive shaft.
Manual welders and safety cover can be attached.
Parmameters of Drive Shaft Balancing Machine
Technical data | SFHC-100 | SFHC-350 | SFHC-1100 | SFHC-3500 |
Max Mass of Workpiece (kg) | 100 | 350 | 1100 | 3500 |
Effective length of workpiece(mm) | 2000 | 2000 | 3000 | 3000 |
Max Diameter of Workpiece(mm) | Φ130 | Φ130 | Φ400 | Φ400 |
Shaft tube diameter of workpiece(mm) | Ø120 | Ø120 | Ø300 | Ø300 |
Balancing speed(mm) | 16001) | 16001) | 410-7501) | 410-7501) |
Motor Power(KW) | 1.52) | 2.22) | 32) | 5.52) |
Universal joint torque(N.M) | 60 | 60 | 300 | 300 |
Min Achievable Residual Unbalance Amount(e mar ) | ≤2.5g | ≤2.5g | ≤2.5g | ≤2.5g |
Once reduced rate (%) | ≥90 | ≥90 | ≥90 | ≥90 |
Strict Product Quality Control
Company Certificates:
Customers
Workshop debugging
Packaging
