Thousands of Radial Drilling Machine was sold per year The Radial Drilling Machines has history of 70 years.. Model NO. Z3040x12, Z3040x16,Z3050x12,Z3050x16,Z3063x20,Z3080x25,Z30100x31,Z30125x40
| Quantity: | |
|---|---|
Introduction of Radial Drilling Machine Z3050x16---Original ZJ Brand
1.Radial Drilling Machine Z3050x16 is suitable for drilling ,boring ,enlarging, reaming and tapering common parts.
2. High-strength cast iron or special steel is used for critical components.
3. The parts and components are provided with stable precision through specialized processing.
4. The hydraulic power can realize spindle variable speed flexibly on the safe side.
5. Economic cutting is available for 16-step spindle rotation speed and feed.
6. The hydraulic power can realize clamping and unclamping quickly on the safe side.
7. It is quick and convenient to operate under the mechanical .electrical and hydraulic control over the head stock
Parameter of Radial Drilling Machine Z3050x16
Model | Unit | Z3050x16/1 | |
Max. Drilling diameter | mm | 50 | |
Distance between spindle axis and column | Max. | mm | 1600 |
Min. | mm | 350 | |
Distance between spindle nose and working surface of machine base | Max. | mm | 1220 |
Min. | mm | 320 | |
Spindle Travel | mm | 315 | |
Spindle taper | - | Morse 5# | |
Speed range of spindle | m/min | 25-2000 | |
Steps of spindle speed | step | 16 | |
Feed range of spindle | mm | 0.04-3.2 | |
Steps of spindle feed | step | 16 | |
Worktable dimension | mm | 630x500x500 | |
Max.torque of spindle | Nm | 500 | |
Lifting distance of swing arm | mm | 580 | |
Machine weight | kg | 3500 | |
Size(LxWxH) | mm | 2500x1070x2840 |
Benefit:
1. High preicision drilling holes.
2. Increasing working efficiency
3. 7x24 hour on line service
Geometric accuracy inspection table
S/N | Item | Tolerance |
1 | Flatness of the working surface of the base | At 1000 measuring length: 0.10 flat or concave |
2 | Parallelism of the headstock movement to the working surface of the base | The measurement length at any 1000 is: 0.30 |
3 | Parallelism of the rocker arm movement to the working surface of the base | Measuring length at any 300: 0.05 |
4 | 1. Radial runout of the axis of the spindle taper hole: | 1：0.02 2：0.04 |
5 | 1. Close to the end face of the spindle | 0.20/1000* *Indicator probe measuring contact distance |
6 | 2. 300 points away from the end face of the spindle | A 0.10/300 B 0.05/300 |
7 | The perpendicularity of the spindle axis to the working surface of the base | A0.06 B0.10 |
8 | The verticality of the working surface of the spindle vertical movement base | Load value (feed resistance) 15200Na.b3/1000 The distance between the two contacts of the indicator |
Details
Introduction of Radial Drilling Machine Z3050x16---Original ZJ Brand
1.Radial Drilling Machine Z3050x16 is suitable for drilling ,boring ,enlarging, reaming and tapering common parts.
2. High-strength cast iron or special steel is used for critical components.
3. The parts and components are provided with stable precision through specialized processing.
4. The hydraulic power can realize spindle variable speed flexibly on the safe side.
5. Economic cutting is available for 16-step spindle rotation speed and feed.
6. The hydraulic power can realize clamping and unclamping quickly on the safe side.
7. It is quick and convenient to operate under the mechanical .electrical and hydraulic control over the head stock
Parameter of Radial Drilling Machine Z3050x16
Model | Unit | Z3050x16/1 | |
Max. Drilling diameter | mm | 50 | |
Distance between spindle axis and column | Max. | mm | 1600 |
Min. | mm | 350 | |
Distance between spindle nose and working surface of machine base | Max. | mm | 1220 |
Min. | mm | 320 | |
Spindle Travel | mm | 315 | |
Spindle taper | - | Morse 5# | |
Speed range of spindle | m/min | 25-2000 | |
Steps of spindle speed | step | 16 | |
Feed range of spindle | mm | 0.04-3.2 | |
Steps of spindle feed | step | 16 | |
Worktable dimension | mm | 630x500x500 | |
Max.torque of spindle | Nm | 500 | |
Lifting distance of swing arm | mm | 580 | |
Machine weight | kg | 3500 | |
Size(LxWxH) | mm | 2500x1070x2840 |
Benefit:
1. High preicision drilling holes.
2. Increasing working efficiency
3. 7x24 hour on line service
Geometric accuracy inspection table
S/N | Item | Tolerance |
1 | Flatness of the working surface of the base | At 1000 measuring length: 0.10 flat or concave |
2 | Parallelism of the headstock movement to the working surface of the base | The measurement length at any 1000 is: 0.30 |
3 | Parallelism of the rocker arm movement to the working surface of the base | Measuring length at any 300: 0.05 |
4 | 1. Radial runout of the axis of the spindle taper hole: | 1：0.02 2：0.04 |
5 | 1. Close to the end face of the spindle | 0.20/1000* *Indicator probe measuring contact distance |
6 | 2. 300 points away from the end face of the spindle | A 0.10/300 B 0.05/300 |
7 | The perpendicularity of the spindle axis to the working surface of the base | A0.06 B0.10 |
8 | The verticality of the working surface of the spindle vertical movement base | Load value (feed resistance) 15200Na.b3/1000 The distance between the two contacts of the indicator |
Details
