Feature of VMC855HL vertical machining center

1 The three axes adopt linear roller guideway, which has the characteristics of high rigidity, low noise and low friction, and can do rapid displacement and obtain the best circular accuracy.

2.Rapid displacement X/Y/Z:24/24/24m/min.

3. 3-axis servo motor adopts absolute detection, no need to do home return every time when machining, which can improve the efficiency, and at the same time, because there is no limit switch, it can reduce the failure rate and increase the reliability of the machine.

4. The three-axis servo motor and screw are directly connected by precision coupling, which can eliminate the connection gap and improve the transmission efficiency.

5. The cutting fluid capacity is up to 200L, which can discharge the cutting fluid quickly. The water tank is designed with multiple filters and placed on the inside of the machine to save space.

6. The spindle adopts high precision belt spindle with standard speed up to 10000rpm, the front end of the spindle adopts labyrinth design, and the spindle air curtain function is equipped as standard, which prevents the cutting fluid from entering into the inside of the spindle bearings, and improves the service life of the spindle; the standard machine adopts high-powered spindle electric rotor, and the motor with higher torque output can be selected as a high-torque motor. Realize the real sense of high-speed processing.

7. The use of high-tough four-flap claw broach, large contact surface, strong tool grip, tool handle spigot loss is small, long life.

8. The electrical box adopts the side hanging design, saving the occupied space, so that the limited space, get the maximum use.

9. In order to ensure the quality of the whole machine, the main outsourcing components are used in the world famous brand manufacturers:

Spindle：KENTURN

Linear slide guideway: PMI/HIWIN

Ballscrew: PM I/HIWIN

Round tool magazine: Taiwan Relib /GangTian

CNC system: SINUMERIK 828D, Spindle motor: Siemens Germany, Servo motor: Siemens Germany

Please visit for parameter: https://www.starfishmachine.com/3-Axis-4-Axis-5-Axis-CNC-Vertical-Machining-Center-pd744193588.html