Views: 0 Author: Site Editor Publish Time: 2025-03-25 Origin: Site
Automatic tool changer of vertical lathe
The tool magazine is suspended on the right side of the beam.
The automatic tool changer consists of three parts: the tool clamp, the automatic clamping mechanism of the tool clamp at the lower end of the ram of the vertical tool holder, and the tool magazine at the right end of the crossbeam.
The toolclamp adopts the tooth disk positioning structure on the ram.
The tool magazine is driven by a motor, and the speed is reduced by a deceleration mechanism, so that the tool magazine disk obtains the required speed.
The toolselecting method adopts the method of selecting knives according to the position, and the toolselecting and changing action is completed by PC control. There are 8 tool positions on the tool magazine disk, which can hold 2 turning tool holders, 4 milling taper shanks, a right angle head and a dust cover.
