VMC-1060HL VMC-1160HL
| Quantity: | |
|---|---|
Introduction of High Precision Linear Vertical Machining Center
1. CNC Vertical Machining Center is a cutting-edge industrial machine designed for precision machining of intricate components. With advanced technology and high-performance capabilities, this machine is ideal for producing high-quality parts with tight tolerances.
Equipped with state-of-the-art features, our CNC Vertical Machining Center can easily handle complex machining tasks. Its precision engineering ensures consistent and accurate results, making it a reliable choice for a wide range of industries.
2. Whether you are manufacturing aerospace components, automotive parts, or medical devices, our CNC Vertical 3. The machining center is the perfect solution for your precision machining needs. Trust in our machine to deliver exceptional performance and superior quality for all your machining requirements.
4. 5 axis 4linkage, 5 axis 5 linkage vertical machining center can be made
Configuration
Parameter Loop control CNC vertical machining center
| Parts | Item | VMC-1060HL | VMC-1160HL |
Worktable | Size (width × Long)（mm） | 1200×600 | 1200×600 |
Maximum payload（Kg） | 800 | 800 | |
Travel | Table movement (x-axis mm) | 1000 | 1100 |
Worktable feed (Y-axis mm) | 600 | 600 | |
Spindle movement (Z-axis mm) | 600 | 600 | |
Distance from nose end of spindle to working table (mm) | 120-720 | 120-720 | |
Distance from center of spindle to guide surface of bed (mm) | 650 | 635 | |
Spindle | Taper# | ISO 7:24 No. 40 | ISO 7:24 No. 40 |
Spindle speed（rpm） | 8000/10000（OPT） | 8000/10000（OPT） | |
Power transmission mode | Belt type | Belt type | |
Move | Three-axis fast movement（m/min） | 24/24/24 | 24/24/24 |
Electric machinery | Spindle (30 minutes/continuous)（Kw） | 7.5/11（11/15） | 7.5/11（11/15） |
XYZ AXIS（Kw） | 3.0/3.0/3.0 | 3.0/3.0/3.0 | |
XYZGuide | Form | Rail (Two linear and One Hard) | |
CNC system | Model | SIEMENS/FANUC/MITSUBISHI | SIEMENS/FANUC/MITSUBISHI |
Other | Weight（Kg） | 6500 | 7000 |
Area covered（mm） | 3150×2300mm | 3150×2300mm | |
FAQ
Acceptance:
The content of pre-acceptance by the standard of machine acceptance
and a precision inspection sheet.
Installation
1) The buyer, according to the foundation chart, was offered by the seller.
2) After the equipment arrives at the user site, the buyer needs to complete the preparations for the three-phase power supply, three-phase four-core cable, compressed air source, etc., and provide the cables as mentioned above and air pipes to enter the standard interface of the machine tool, and the user will notify the supplier to install and debug after the preparation is ready.
Training
• 1-2 days: Inspection of cable connection, the finished foundation is qualified to guide the
customer to know each component's name and functions as well.
1) Demo and teach the user to calibrate and use customer workpieces in the machine.
Review all operation steps and learn each part's maintenance method.
Warranty period is 14 months from the date of debugging in the customer workshop.
In the warranty period
If some parts need to be replaced due to the quality of the product, the company is responsible for free replacement. If the issue is not related to the product quality of the Vertical Lathe, or if the company needs to send a technician to fix the Vertical Lathe, the appropriate fees should be collected.
Our company will assist customers in getting the machine running well and answer all questions
from customers online.
For simple operation issues through email/WhatsApp/video/phone call deal with directly
For a difficult issue, invite an engineer to help you repair or debug onsite.
Out of warranty period:
The customer just pays the cost of parts at a reasonable and lower price.
Troubleshooting
1) Before delivery: The Special QC department carefully checks to ensure that all is qualified with high
quality
2) Through seeing customers' actual photos or videos, using the discussed group or email, or video
meeting or a phone call gives solutions immediately
3) The dispatch engineer goes to customer workshops onsite.
Introduction of High Precision Linear Vertical Machining Center
1. CNC Vertical Machining Center is a cutting-edge industrial machine designed for precision machining of intricate components. With advanced technology and high-performance capabilities, this machine is ideal for producing high-quality parts with tight tolerances.
Equipped with state-of-the-art features, our CNC Vertical Machining Center can easily handle complex machining tasks. Its precision engineering ensures consistent and accurate results, making it a reliable choice for a wide range of industries.
2. Whether you are manufacturing aerospace components, automotive parts, or medical devices, our CNC Vertical 3. The machining center is the perfect solution for your precision machining needs. Trust in our machine to deliver exceptional performance and superior quality for all your machining requirements.
4. 5 axis 4linkage, 5 axis 5 linkage vertical machining center can be made
Configuration
Parameter Loop control CNC vertical machining center
| Parts | Item | VMC-1060HL | VMC-1160HL |
Worktable | Size (width × Long)（mm） | 1200×600 | 1200×600 |
Maximum payload（Kg） | 800 | 800 | |
Travel | Table movement (x-axis mm) | 1000 | 1100 |
Worktable feed (Y-axis mm) | 600 | 600 | |
Spindle movement (Z-axis mm) | 600 | 600 | |
Distance from nose end of spindle to working table (mm) | 120-720 | 120-720 | |
Distance from center of spindle to guide surface of bed (mm) | 650 | 635 | |
Spindle | Taper# | ISO 7:24 No. 40 | ISO 7:24 No. 40 |
Spindle speed（rpm） | 8000/10000（OPT） | 8000/10000（OPT） | |
Power transmission mode | Belt type | Belt type | |
Move | Three-axis fast movement（m/min） | 24/24/24 | 24/24/24 |
Electric machinery | Spindle (30 minutes/continuous)（Kw） | 7.5/11（11/15） | 7.5/11（11/15） |
XYZ AXIS（Kw） | 3.0/3.0/3.0 | 3.0/3.0/3.0 | |
XYZGuide | Form | Rail (Two linear and One Hard) | |
CNC system | Model | SIEMENS/FANUC/MITSUBISHI | SIEMENS/FANUC/MITSUBISHI |
Other | Weight（Kg） | 6500 | 7000 |
Area covered（mm） | 3150×2300mm | 3150×2300mm | |
FAQ
Acceptance:
The content of pre-acceptance by the standard of machine acceptance
and a precision inspection sheet.
Installation
1) The buyer, according to the foundation chart, was offered by the seller.
2) After the equipment arrives at the user site, the buyer needs to complete the preparations for the three-phase power supply, three-phase four-core cable, compressed air source, etc., and provide the cables as mentioned above and air pipes to enter the standard interface of the machine tool, and the user will notify the supplier to install and debug after the preparation is ready.
Training
• 1-2 days: Inspection of cable connection, the finished foundation is qualified to guide the
customer to know each component's name and functions as well.
1) Demo and teach the user to calibrate and use customer workpieces in the machine.
Review all operation steps and learn each part's maintenance method.
Warranty period is 14 months from the date of debugging in the customer workshop.
In the warranty period
If some parts need to be replaced due to the quality of the product, the company is responsible for free replacement. If the issue is not related to the product quality of the Vertical Lathe, or if the company needs to send a technician to fix the Vertical Lathe, the appropriate fees should be collected.
Our company will assist customers in getting the machine running well and answer all questions
from customers online.
For simple operation issues through email/WhatsApp/video/phone call deal with directly
For a difficult issue, invite an engineer to help you repair or debug onsite.
Out of warranty period:
The customer just pays the cost of parts at a reasonable and lower price.
Troubleshooting
1) Before delivery: The Special QC department carefully checks to ensure that all is qualified with high
quality
2) Through seeing customers' actual photos or videos, using the discussed group or email, or video
meeting or a phone call gives solutions immediately
3) The dispatch engineer goes to customer workshops onsite.
